mesytec-mnode/external/taskflow-3.8.0/doxygen/examples/graph_pipeline.dox

namespace tf {

/** @page GraphProcessingPipeline Graph Processing Pipeline

We study a graph processing pipeline that propagates a sequence of linearly
dependent tasks over a dependency graph. 
In this particular workload, we will learn how to transform task graph parallelism 
into pipeline parallelism.


@tableofcontents

@section FormulateTheGraphProcessingPipelineProblem Formulate the Graph Processing Pipeline Problem

Given a directed acyclic graph (DAG), where each node encapsulates a sequence
of linearly dependent tasks, namely <i>stage tasks</i>,
and each edge represents a dependency between two tasks at the same stages
of adjacent nodes.
For example, assuming `fi(u)` represents the `i`<sup>th</sup>-stage task 
of node `u`,
a dependency from `u` to `v` requires `fi(u)` to run before `fi(v)`.
The following figures shows an example of three stage tasks 
in a DAG of three nodes (`A`, `B`, and `C`) and 
two dependencies (`A->B` and `A->C`):

@dotfile images/graph_pipeline_1.dot

While we can directly create a taskflow for the DAG 
(i.e., each task in the taskflow runs `f1`, `f2`, and `f3` sequentially),
we can describe the parallelism as a three-stage pipeline that 
propagates a topological order of the DAG through three stage tasks.
Consider a valid topological order of this DAG, `A, B, C`,
its pipeline parallelism can be illustrated in the following figure:

@dotfile images/graph_pipeline_2.dot

At the beginning, `f1(A)` runs first.
When `f1(A)` completes, it moves on to `f2(A)` and, meanwhile,
`f1(B)` can start to run together with `f2(A)`, and so on so forth.
The straight line represents two parallel tasks that can overlap in time in the pipeline.
For example, `f3(A)`, `f2(B)`, and `f1(C)` can run simultaneously.
The following figures shows the task dependency graph of this pipeline workload:

@dotfile images/graph_pipeline_3.dot

As we can see, tasks in diagonal lines (lower-left to upper-right) 
can run in parallel.
This type of parallelism is also referred to as @em wavefront parallelism,
which sweeps parallel elements in a diagonal direction.

@note
Depending on the graph size and the number of stage tasks,
task graph parallelism and pipeline parallelism can bring very different
performance results.
For example,
a small graph will a long chain of stage tasks may perform better with pipeline
parallelism than task graph parallelism,
and vice versa.

@section CreateAGraphProcessingPipeline Create a Graph Processing Pipeline

Using the example from the previous section, we create a three-stage pipeline that
encapsulates the three stage tasks (`f1, f2, f3`) in three pipes. 
By finding a topological order of the graph,
we can transform the node dependency into a sequence of linearly dependent data tokens
to feed into the pipeline.
The overall implementation is shown below:

@code{.cpp}
#include <taskflow/taskflow.hpp>
#include <taskflow/algorithm/pipeline.hpp>

// 1st-stage function
void f1(const std::string& node) {
  printf("f1(%s)\n", node.c_str());
}

// 2nd-stage function
void f2(const std::string& node) {
  printf("f2(%s)\n", node.c_str());
}

// 3rd-stage function
void f3(const std::string& node) {
  printf("f3(%s)\n", node.c_str());
}

int main() {

  tf::Taskflow taskflow("graph processing pipeline");
  tf::Executor executor;

  const size_t num_lines = 2;
  
  // a topological order of the graph
  //    |-> B
  // A--|
  //    |-> C
  const std::vector<std::string> nodes = {"A", "B", "C"};

  // the pipeline consists of three serial pipes
  // and up to two concurrent scheduling tokens
  tf::Pipeline pl(num_lines,

    // first pipe calls f1
    tf::Pipe{tf::PipeType::SERIAL, [&](tf::Pipeflow& pf) {
      if(pf.token() == nodes.size()) {
        pf.stop();
      }
      else {
        f1(nodes[pf.token()]);
      }
    }},
    
    // second pipe calls f2
    tf::Pipe{tf::PipeType::SERIAL, [&](tf::Pipeflow& pf) {
      f2(nodes[pf.token()]);
    }},

    // third pipe calls f3
    tf::Pipe{tf::PipeType::SERIAL, [&](tf::Pipeflow& pf) {
      f3(nodes[pf.token()]);
    }}
  );

  // build the pipeline graph using composition
  tf::Task init = taskflow.emplace([](){ std::cout << "ready\n"; })
                          .name("starting pipeline");
  tf::Task task = taskflow.composed_of(pl)
                          .name("pipeline");
  tf::Task stop = taskflow.emplace([](){ std::cout << "stopped\n"; })
                          .name("pipeline stopped");

  // create task dependency
  init.precede(task);
  task.precede(stop);

  // dump the pipeline graph structure (with composition)
  taskflow.dump(std::cout);

  // run the pipeline
  executor.run(taskflow).wait();

  return 0;
}
@endcode

@subsection GraphPipelineFindATopologicalOrderOfTheGraph Find a Topological Order of the Graph

The first step is to find a valid topological order of the graph, such that
we can transform the graph dependency into a linear sequence.
In this example, we simply hard-code it:

@code{.cpp}
const std::vector<std::string> nodes = {"A", "B", "C"};
@endcode


@subsection GraphPipelineDefineTheStageFunction Define the Stage Function

This particular workload does not propagate data directly through the pipeline.
In most situations, data is directly stored in a custom graph data structure,
and the stage function will just need to know which node to process.
For demo's sake, we simply output a message to show which stage function is
processing which node:

@code{.cpp}
// 1st-stage function
void f1(const std::string& node) {
  printf("f1(%s)\n", node.c_str());
}

// 2nd-stage function
void f2(const std::string& node) {
  printf("f2(%s)\n", node.c_str());
}

// 3rd-stage function
void f3(const std::string& node) {
  printf("f3(%s)\n", node.c_str());
}
@endcode

@note
A key advantage of %Taskflow's pipeline programming model is that we do not provide any
data abstraction but give users full control over data management, which is typically
application-dependent.
In an application like this graph processing pipeline,
data is managed in a global custom graph data structure, and any data abstraction
provided by the library can become a unnecessary overhead.


@subsection GraphPipelineDefineThePipes Define the Pipes

The pipe structure is straightforward. Each pipe encapsulates the corresponding
stage function and passes the node into the function argument.
The first pipe will cease the pipeline scheduling when it has processed
all nodes.
To identify which node is being processed at a running pipe,
we use tf::Pipeflow::token to find the index:

@code{.cpp}
// first pipe calls f1
tf::Pipe{tf::PipeType::SERIAL, [&](tf::Pipeflow& pf) {
  if(pf.token() == nodes.size()) {
    pf.stop();
  }
  else {
    f1(nodes[pf.token()]);
  }
}},

// second pipe calls f2
tf::Pipe{tf::PipeType::SERIAL, [&](tf::Pipeflow& pf) {
  f2(nodes[pf.token()]);
}},

// third pipe calls f3
tf::Pipe{tf::PipeType::SERIAL, [&](tf::Pipeflow& pf) {
  f3(nodes[pf.token()]);
}}
@endcode


@subsection GraphPipelineDefineTheTaskGraph Define the Task Graph

To build up the taskflow for the pipeline,
we create a module task with the defined pipeline structure and connect it with
two tasks that output helper messages before and after the pipeline:

@code{.cpp}
tf::Task init = taskflow.emplace([](){ std::cout << "ready\n"; })
                        .name("starting pipeline");
tf::Task task = taskflow.composed_of(pl)
                        .name("pipeline");
tf::Task stop = taskflow.emplace([](){ std::cout << "stopped\n"; })
                        .name("pipeline stopped");
init.precede(task);
task.precede(stop);
@endcode

@dotfile images/graph_pipeline_4.dot

@subsection GraphPipelineSubmitTheTaskGraph Submit the Task Graph

Finally, we submit the taskflow to the execution and run it once:

@code{.cpp}
executor.run(taskflow).wait();
@endcode

Three possible outputs are shown below:

@code{.shell-session}
# possible output 1
ready
f1(A)
f2(A)
f1(B)
f2(B)
f3(A)
f1(C)
f2(C)
f3(B)
f3(C)
stopped

# possible output 2
f1(A)
f2(A)
f3(A)
f1(B)
f2(B)
f3(B)
f1(C)
f2(C)
f3(C)
stopped

# possible output 3
ready
f1(A)
f2(A)
f3(A)
f1(B)
f2(B)
f1(C)
f2(C)
f3(B)
f3(C)
stopped
@endcode

@section GraphPipelineReference Reference

We have applied the graph processing pipeline technique to speed up a circuit
analysis problem. Details can be referred to our publication below:

+ Cheng-Hsiang Chiu and Tsung-Wei Huang, &quot;[Efficient Timing Propagation with Simultaneous Structural and Pipeline Parallelisms](https://tsung-wei-huang.github.io/papers/dac2022.pdf),&quot; <em>ACM/IEEE Design Automation Conference (DAC)</em>, San Francisco, CA, 2022


*/

}